Shingle roofing is the backbone of residential roofing in Sikes. Whether you're choosing architectural shingles for their dimensional look or three-tab shingles for budget-friendly coverage, the installation process is what determines how long they last. Sikes Roofing & Maintenance follows manufacturer nailing specs and overlap requirements on every job.
Architectural shingles are heavier and more wind-resistant than three-tab because of their laminated, multi-layer construction. The fiberglass mat provides the structural base, asphalt makes it waterproof, and the granulated ceramic surface protects against UV radiation and provides fire resistance. We install them over synthetic underlayment with ice-and-water shield at valleys and eaves.
Our Shingle Roofing Process
Shingle Selection
We inspect your existing roof deck and sheathing, measure the area, and help you choose between architectural and three-tab asphalt shingles. Color samples brought to your Sikes home.
Tear-Off & Deck Prep
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Underlayment & Flashing
The waterproofing layer is what protects your home if a shingle ever fails. We install ice-and-water shield at every vulnerable point — valleys, eaves, penetrations — then roll synthetic underlayment over the entire deck. Drip edge directs water into gutters, not behind fascia boards.
Shingle Installation
Starter strips along the eave, then field courses of architectural shingles with manufacturer-specified offset and overlap. Each shingle nailed in the designated zone with 4-6 fasteners. Ridge cap shingles hand-nailed at every hip and ridge for a finished, watertight top.
What Sikes Customers Say
"Our neighbors recommended them and now we understand why. Meticulous attention to detail and they treated our home like it was their own."
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
Why Choose Sikes Roofing & Maintenance for Shingle Roofing?
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.